Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

i want to control I/O port on internet

Status
Not open for further replies.
badboy2007

badboy2007

Advanced Member level 4
Joined
Feb 5, 2007
Messages
114
Helped
29
Reputation
58
Reaction score
24
Trophy points
1,298
Location
Cambodia
Activity points
1,870
please help me !!! i want to control I/O port on internet but know little about HTML ..so please all of you help me and give the sample for me too na thank verry much i hope you all help me.....
love!!
badboy2007
 

Hi,

What kind of I/O port you want to control?
Perheps you can read into TCP/IP.
You can use most programming language to write the codes for
TCP/IP communication.
 

    badboy2007

    badboy2007

    Points: 2
    Helpful Answer Positive Rating
sorry that i dont tell you clear i want to control i/o port of pc na..

thank so much!!!!
 

Hi,

For communication over Internet, you can read more about TCP/IP
or network socket.
As for which port you need, I still not very clear.
I guess propably you mean parallel port.
There are many kinds of port in a PC.
- Serial port
- Parallel port
- PCI
- USB port
- Network port (software port)
- many many more port
 

    badboy2007

    badboy2007

    Points: 2
    Helpful Answer Positive Rating
ok i'm sorry na i just want to control serial port and parallel port only na thank so much!!
 

do you have more? i think it can help me but not so clear cos i had have it alreay na thank
 

Hi badboy2007,

Nope. I don't have any more. I learn the knowledge from that website.
Quite well written. You may need read it again, and use search engine
to refine what you want to know in details.
Perhaps you can start working on it,
and ask more technical question in this forum.
There are a lot of people here to answer your question.

Best Regards,
Siong Boon
 

    badboy2007

    badboy2007

    Points: 2
    Helpful Answer Positive Rating
all i need more doc i want to use PC for being a server !!
 

You might like to provide a detail picture so that people here can help you. It is not a difficult thing to do once you have done it.
 

    badboy2007

    badboy2007

    Points: 2
    Helpful Answer Positive Rating
ì think it easy but i just dont know lot about code html or java..

i mean pc is server, is i have my pc at home have internet and i'm at office, i want control like power off.. or something at my home by remote with internet control my home ...

thank you.
 

If you know it, it is easy.
If you don't know, it is difficult.

Pick up a java book. Learn step by step, if you are interested in Java.
Learn simple circuit, if you are interested in circuit control.

There are different product meant for different interest group.
If you are no good at circuit, you can buy ready made controller
and start building your application.

If you are no good at both software & hardware,
there are also ready made product meant for the consumer.

If you do not like programming,
there are also other language which makes programming much easier.
New higher languages do not even need any code to operate.
Just draw flow chart.

Any method you choose to go, you will need to go through some
form of learning/training. It is your choose to choice
which area you would like to work/learn more on.

Sincerely,
Siong Boon

MODERATOR: SIGNATURE LINKS ARE NOT ALLOWED
 

    badboy2007

    badboy2007

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top