Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Physical Limitations of Gate Size

Status
Not open for further replies.
lordsathish

lordsathish

Full Member level 5
Joined
Feb 11, 2006
Messages
246
Helped
33
Reputation
66
Reaction score
3
Trophy points
1,298
Location
Asia
Activity points
2,698
Hi Ppl,
How does scaling down the gate size of the MOS cause power dissipation and data synchronization problems ?

Thanks
 

Hi

This is more beyond a simple question. It is a two-folded research item.

1. Power dissipation caused by mos scaling
2. Data or clock synchronization

1.
Power = Dynamic + Static + Short Circuit
Dynamic power ~ VDD^2
VDD is reduced with scaling
Load equivalent capacitance related to MOS internal capacitances in turn technology and scale factor

2. Scaling affects clock frequency
Power ~ Clock frequency
Data synchronization ~ scaling

tnx
 

lordsathish said:
Hi Ppl,
How does scaling down the gate size of the MOS cause power dissipation and data synchronization problems ?

Thanks
Click to expand...

Hi,
Schrinking in feature size results in a very compact circuits. This means, particularly, that the oxyde of the transistors/capa/res of this IC becomes more thin leading to a lot of leakage. Leakage is the main cause of power dissipation in 65nm tech circuit and below.

Synchronization problem is due to interconnects. With scaling, the resistance/capacitance of the on chip wire increase. The electrical signal become more slow since delay is propotional to wire's resistance/capacitace. If this signal is a clock signal, designer will notice skews during simulation.
 

    lordsathish

    lordsathish

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top