Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

why my co-simulation show error in ADS?

Status
Not open for further replies.

TerryADS

Full Member level 2
Full Member level 2
Joined
Oct 31, 2008
Messages
133
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Location
USA
Activity points
2,066
Hi friends,
I want to co-simulate power divider when i create layout component,it shows error.Anyone can help me?
 

Your file name(k=1_splitter_optimization_complete_1) for the layout is not a good one. Change to a short one such as "k111" should then be ok.
 

    TerryADS

    Points: 2
    Helpful Answer Positive Rating
Thanks,Kayaoo.As your mention,i fixed it.But one case show as following when i ran momentum.

How i can solve it?
 

I have no idea as my ADS2005 does not report such a warning. However I don't think it will be a problem if you do not use "reference offset".
 

    TerryADS

    Points: 2
    Helpful Answer Positive Rating
Oh...is it nothing with getting an accurate result if not use the "reference offset".?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top