Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Voltage level shifter (1.8->3.3)

Status
Not open for further replies.
I

IADanilov

Member level 3
Joined
Mar 21, 2008
Messages
54
Helped
5
Reputation
10
Reaction score
4
Trophy points
1,288
Location
Moscow, Russia
Activity points
1,707
level shifter 1.8 3.3

Hello!

Can somebody advise me topology of level shifter to translate 1.8 V voltage level to 3.3 V?

Now I use level shifter which have problem with duty cycle.
 

1.8 3.3 level shifter

is it a dc level shift or transfer a signal between gnd and 1.8 to something and 3.3
 

transistor level shifter 1.8 3.3

How fast is your signal ?

there are so many companies which makes such ICs or you can make transistor based ckt .

**broken link removed**
 

level shift 3.3 1.8

this is typical in case when N-channel transistors gain doesn't have enough margin over PMOSs. Increase NMOS width, checking operation by simulation in worst case:
N -> slow; P -> fast; temperature - maximum; Vdd_core -> minimum; Vdd_io -> maximum.
 

    I

    IADanilov

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top