Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS Optimetrics Tutorial for Coax

Status
Not open for further replies.
T

tortoss

Newbie level 5
Joined
Jan 31, 2008
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,363
I'm a new HFSS user I'm Simulating a coax. coupled resonator, i need to vary the distance of a copper box underneath the end part of the resonator ( I will attach a pic. showing the structure), and i need to have a freq. sweep for each distance value. Is this possible, i know how to vary the distance (by adding a variable for the z-co-ordinate) but I'm not sure if it is possible to have also a freq. sweep. So if anyone can help me that will be great thanks a lot.
 

hfss optimetrics analysis

first of all what version of HFSS are you using?

- You should be able to do both a frequency sweep and optimetrics (variation) at the same time.

1 - set the analysis set up. create a new solution, and choose your solution frequency.
2 - Add a sweep under that solution setup you just created. Hierarchically, you see solution under analysis, and sweep under solution.

3 - your distance should referenced as a variable. for distance height, put a character or phrase to represent the variable.

4 - go to optimetrics, and create parameter sweep. i believe it is the first one. Set up your parameter with the wanted number of points.
and run.
 

hfss tutorial optimetrics

I'm using HFSS v.9
does it do the freq. sweep for each distance?

Thanks
 

hfss, optimetrics

you may use tune tool too. set a variable for distance ant with including sweep start for tune..
 

    V

    Points: 2
    Helpful Answer Positive Rating
hfss tune

so how did you get it done? i am interested to know if you succeeded or not?
 

    V

    Points: 2
    Helpful Answer Positive Rating
hfss optimetrics tutorial

actually I only tried to do it with the parametric optimetrics and it didn't work I can choose the ''setup:Sweep1'' and choose only one freq. so I did it in the long way I made individual projects for different distances. I have not tried the tuning tool
 

optimetrics new

can anybody upload the complete tutorial on optimetric regarding patch antena......its may be helpfull ...[plz




















tqqqqq








regards



alan
 

hfss optimetrics tutorials

Here's the HFSS Optimetrics Tutorial I got from HFSS Support. Its a tutorial for a Coax Stub Resonator.

Cheers,
-Prakash
 
Re: HFSS Optimetrics Tutorial

can any one upload the optimization example for a rectangular wave guide
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top