Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What are the effects of dividing the VCO output by 2 on output jitter?

Status
Not open for further replies.
J

jfyan

Full Member level 2
Joined
May 3, 2006
Messages
145
Helped
26
Reputation
52
Reaction score
4
Trophy points
1,298
Location
shanghai,china
Activity points
2,064
hi all,
What are the effects of dividing the VCO output by 2 on output jitter?

jeff
 

Re: about jiiter

Hi,

You have to be more clear on your doubt. If it is very low frequency signal at the output of VCO then jitter is not much.

If you need more details, don't hesitate to contact me.

Regards,

N.Muralidhara
CRL-BEL
 

    J

    jfyan

    Points: 2
    Helpful Answer Positive Rating
about jiiter

Jitter will remain the same.

Think of divide by 2 as eliminating alternate edges. The remaining edges will have same jitter as from original source, unless the divider is adding more jitter.
 

    J

    jfyan

    Points: 2
    Helpful Answer Positive Rating
Re: about jiiter

that depends which kind of vco likely to be desigh actually lc vco is having less jitter compare to ring vco
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top