Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Please HELP me!!! HFSS capacitor simulation

Status
Not open for further replies.
E

ElectroLuke

Newbie level 3
Joined
Jan 5, 2008
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,318
how to simulate a capacitor in hfss

Hi everybody! i'm new to Hfss. I need to simulate a parallel plate capacitor with air as dielectric. I've designed it according to the hfss guide i've found on the web, but i would like to calculate the S and Y parameters for this structure (i think i'm gonna post the hfss file as soon as i'm home). How do i have to excite the capacitor and where? Is it possible to get a plot of the impedance value vs frequency? What boundaries do i have to use (i just have assigned the radiation boundary to the air, which sorround the whole structure)?
Looking forward to read your answers.
Thank you very much

Luca
 

hfss capacitor

You need to define a lumped port across your two plates. You can draw a 2D sheet with the draw line command that joins the two plates. Select that new sheet and assign it a lumped port. Add a new integration line and draw the arrow from one plate to the other. Then you can generate a report with S and Z parameters of that port. yes you need to have your object in the center of the box whose dimension is at least the wavelength of the frequency you are solving.
 
hfss capacitor simulation

You can simulate it by drawing any object. Then select that object,
right click on it and select:
Assign boundary>Lumped RLC


But i dont the physical dimensions of a capacitor or a varactor??
Does anyone know?
 

Re: how to simulate a capacitor in hfss

ElectroLuke said:
Hi everybody! i'm new to Hfss. I need to simulate a parallel plate capacitor with air as dielectric. I've designed it according to the hfss guide i've found on the web, but i would like to calculate the S and Y parameters for this structure (i think i'm gonna post the hfss file as soon as i'm home). How do i have to excite the capacitor and where? Is it possible to get a plot of the impedance value vs frequency? What boundaries do i have to use (i just have assigned the radiation boundary to the air, which sorround the whole structure)?
Looking forward to read your answers.
Thank you very much

Luca
Click to expand...

Have you been able to solve this problem ?
 

Re: hfss capacitor

etothe456t said:
You need to define a lumped port across your two plates. You can draw a 2D sheet with the draw line command that joins the two plates. Select that new sheet and assign it a lumped port. Add a new integration line and draw the arrow from one plate to the other. Then you can generate a report with S and Z parameters of that port. yes you need to have your object in the center of the box whose dimension is at least the wavelength of the frequency you are solving.
Click to expand...

I wont have to be a wavelength. Even for things designed to radiate like antennas, lambda/4 is ok. But for objects like a capacitor it could be much closer.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top