Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

usb interfacing from pc to mcu

Status
Not open for further replies.
G

Green Soldier

Junior Member level 2
Joined
Jun 1, 2006
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,414
sending data to pc from mcu

hello all
if i need to contact an mcu using usb from a pc,,so a data from the usb will be sent to the mcu,and i want to interface this data to the mcu so i think i will use usb to serial IC rite
but how about if i want to send data from the mcu to the computer is there anything to send from serial (mcu) to usb on the computer
there is a usb to serial is there a serial to usb
and if there is none wut to do to solve this interfacing problem
thanx alll
 

When you use a USB to serial convertor, there appears on the PC a virtual serial port which behaves exactly like a normal serial port. Like COM5. Once this does, you can send data from PC to MCU or MCU to PC, both ways. So your serial to USB and USB to serial is one and the same thing.
 
Hi

usb to serial will work both ways
Check this link
**broken link removed**
under USB to RS-232 and RS-485 you can find a lot of information



Salam
Hossam Alzomor
 
or u can use usb microcontroller like pic18

or u can implement the usb protocol on the microcontroller
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top