Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ethernet port interfacing!! pls need help..

Status
Not open for further replies.
A

azsh

Member level 1
Joined
Dec 19, 2005
Messages
33
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Philippines
Activity points
1,531
anybody has an idea how im gonna propagate audio signals thru ethernet port?? using codecs perhaps? how? pls help..
tnx
azsh
 

you got the right idea. to transmit audio through ethernet, you will need to convert to some kind of digital format. If you are not transmitting to another computer but external device you can convert it straight to 1's and 0's, you can buffer the output and send it through a Digtal to audio coverter (DAC) chip. see if that works.
 

    A

    azsh

    Points: 2
    Helpful Answer Positive Rating
what i wanna do is a public address system using our University's Local Area Network. i havent much idea on how will i be able to convert analog signal from microphone to digital signal, using codecs? how will i specify the bandwidth allocated for my transmission, is the parameter governed by the codecs, also? you got me right of transmitting into an external device which is a loudspeaker, it only differs from the usual cause i intend to use the LAN using CAT5 with 100baseTX networking specs, the interfacing between the loudspeakers and the pc connected to this LAN.
we studied much on the theory regarding the bandwidth, etc, still we lack on applying those study on hardware.. too bad..:( pls. help...
tnx anno..:)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top