Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Program for controlling the BW in a DSL network

Status
Not open for further replies.
S

shadoweek

Member level 2
Joined
Jun 30, 2005
Messages
49
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,700
hello,

i have a DSL network amongst my neighbours, and they used port forwarding for the bit torrent cliens they are using, which consumes a large amount of the BW. I have the router and switch and they are under my control. the question is, is there a program that I could use to divide the BW evenly between us?

I know some could suggest a program to be installed on all the network computers which does so like "netlimiter", but i need a program that the adminstrator of the router could use cause, actually, i don't trust my neighbours in installing a program like " netlimiter".

any help??
 

Re: controlling the BW

Shadoweek,

See if your router supports QoS (Quality of service)

If so, you can divide the bandwidth equally between your neighbours, or you can assign a low priority for the bit torrents applications

Regards,
Hassan Mourad
 

    S

    shadoweek

    Points: 2
    Helpful Answer Positive Rating
Re: controlling the BW

hi,

thanks hassan for your help. My router supports the QoS, but how can I specify low priority to the bit torrents applications??

I do have a menu for specifying the priority percentage for low and medium priorities. but, how do I know that the torrents have a low priority specification??

thanks in advance,
 

Re: controlling the BW

Shadoweek,

You will have to do some homework here.

research bittorrent clients for known ports and known servers and adjust the priority for these addresses and/or ports.

or you can take the simple way, and divide the bandwidth equally between the users.

Regards,
Hassan
 

    S

    shadoweek

    Points: 2
    Helpful Answer Positive Rating
Re: controlling the BW

Hassan.Mourad said:
or you can take the simple way, and divide the bandwidth equally between the users.

Regards,
Hassan
Click to expand...

yes, i want that solution if possible, hassan..

thanks in advance
 

Re: controlling the BW

Hi,

this again depends on your router model

i guess you can limit the rate based on the source address in any QoS supporting router

If you can send me the model of your dsl router may be i will be able to send you the exact configuration

Regards,
Hassan
 

    S

    shadoweek

    Points: 2
    Helpful Answer Positive Rating
Re: controlling the BW

my router model is :
CNET Wireless-G ADSL 2/2+ Router
CAR-854



thanks very much hassan for your efforts,
Best Regards,
Shady (Shadoweek)
 

Re: controlling the BW

Shadoweek,

I haven't worked with such router before.

If you could please send me the manual or a screen shot of all configuration windows.

Regards,
Hassan
 

controlling the BW

hi shadoweek ,

i dont know how to divide the BW equally between the users ,

but i can give u a program that completely cuts the internet on neighbours u dont like *grins wickedly*

anyway , u can access the router configuration and cancel the portforwarding they have done ...
 

Re: controlling the BW

,

this again depends on your router model

i guess you can limit the rate based on the source address in any QoS supporting router

If you can send me the model of your dsl router may be i will be able to send you the exact configuration

Regards,
Hassan
 

controlling the BW

Hi,

you can install an ISA Server to block and manage BW.

Regards,
 

controlling the BW

Hello mate
I need your urgent help to do my project.I am doing my final year ECE..I want to do it in Wireless Communication.So plz give ur Suggestion.....Thank You in advance.....
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top