Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need Help in designing DSP Processor

Status
Not open for further replies.
Robinenemy

Robinenemy

Advanced Member level 4
Joined
Jul 10, 2006
Messages
110
Helped
26
Reputation
52
Reaction score
11
Trophy points
1,298
Activity points
1,915
Hello , I Need Help in designing/simulating a Texas TMS 320 62xx series processor using VHDL (VHSIC Hardware Defination Language).

Please guide me from where should I start.

Any links for books/articles are welcome.

Regards & Thanks

Robin
 

Hi ,

Please check whether you have following .

1) if you are planning to do simulation , do you have simulation models for simulator you are using ?
2) compile/assmbler/linker and hex conversion tools to get a hex code with your testcase
3) are u planning to verify processor subsys ?


Thanks & Regards
yln
 

    Robinenemy

    Robinenemy

    Points: 2
    Helpful Answer Positive Rating
Hello Thanks for your reply.

Firstly I have to design the DSP processor using VHDL.
I have access to Tools like Xilinx , Active HDL ver 7.0 and Model Sim
and many other tools.


Please tell me what else do I need?
and
what sort of methodology should I follow for the design procedure.

Regards

Robin
 

Hi ,

To design DSP processor , first you should finalize instructionset and pipeline depth , prefetch buffer ?, how many registers etc ... if you are planning to take the same DSP processor then it is fine and you should have the design spec of same processor ?


when you start design for FPGA better you follow RTL coding guide lines ....
I am attaching a pdf for the same .

Thanks & Regards
yln

you can find the same in the following link
 
Thanks for your Help

Regards

Robin
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top