Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Resources about ATA/ATARI protocol

Status
Not open for further replies.
L

Lykos1986

Member level 4
Member level 4
Joined
Jan 30, 2006
Messages
69
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,876
Hello!!!

May I have any information or e-book about (IDE) parallel ATA/ATARI protocol? I want to control my old HDD with my Spartan FPGA but I don’t have any idea about ATA!!!
Is it deficit to control it?
 

Re: ATA/ATARI Protocol

check opencores for their ide controller project
**broken link removed**
 

Re: ATA/ATARI Protocol

Yes, but there is no documentation about ATA. I have to read some documentation first and then use the ATA core.
 

Re: ATA/ATARI Protocol

Thank you!!!

But know I have got ant other question. What is the ATA/ATARI–3 or ATA/ATARI-4 or ATA/ATARI with packet interface 7 etc. I have to read the latest on?
 

ATA/ATARI Protocol

Well,
that depends on what you're going to design.

There are ATA(HDD), ATAPI(CD,DVD,MO) devices
So, if your device is trying to access CDROM - Spec over ATA/ATAPI-4 is required

And, there are 3 kind of access timing
PIO, (S)MDMA, UDMA
Speed is also different...

My suggestion is read ATA-2 spec first, that's enough for old HDD if you don't care speed.
 

Re: ATA/ATARI Protocol

And also I have to read the FAT32 documentation. Basically I want to build a MP3 player with HDD and CD-ROM using FPGA.
 

Re: ATA/ATARI Protocol

get hold of this book
The SCSI Bus and IDE Interface Protocols, applications and programming
Click to expand...
 

ATA/ATARI Protocol

CD-ROM will need ATAPI command, see ATA/ATAPI-4 spec.
At least you have to read following command

Identify-Packet Device
Packet
Service
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top