Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me design dc-dc converter- 9V output from 12-16V source

Status
Not open for further replies.
S

sssr

Junior Member level 1
Joined
Nov 29, 2004
Messages
16
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
132
dc-dc conveter

Hi

Can anyone help me - I have to design a dc-dc conveter which will supply a output voltage of 9V(5W to 25W) from a 12-16V source. Is there any certain circuit configuration that will work best?

thanks
 

dc-dc conveter

use LM2576 from national
check its site and its datasheet
 

    S

    sssr

    Points: 2
    Helpful Answer Positive Rating
dc-dc conveter

Design the kind of IC ?
 

    S

    sssr

    Points: 2
    Helpful Answer Positive Rating
Re: dc-dc conveter

Can anyone help me - I have to design a dc-dc conveter which will supply a output voltage of 9V(5W to 25W) from a 12-16V source. Is there any certain circuit configuration that will work best?
Click to expand...

configuration or chip?
I can recommend you the 78S40 chip in step down topology

or you could go to the webench of national semionductors to select and design our own:
**broken link removed**

Good luck
 

    S

    sssr

    Points: 2
    Helpful Answer Positive Rating
Re: dc-dc conveter

thanks for the replys

I have to actually design the conveter
I can use a LM555(timer IC) for PWM but no ther ICs

thanks
 

dc-dc conveter

u can use LM 7809 for the regulator voltage. input from 12 Volt and the output will be 9 Volt, but if u want large current u must add schematic with transistor PNP for current amplifier.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top