Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Enable again on orcad autoroute finished

Status
Not open for further replies.
S

suromenggolo

Advanced Member level 4
Joined
Feb 25, 2005
Messages
107
Helped
9
Reputation
18
Reaction score
0
Trophy points
1,296
Activity points
2,240
orcad layout autoroute

On Orcad layout, on running autoroute board if it has finished, warning 'All Sweeps completed (or disabled)'. So running autoroute board again is disable.
If I unroute one some track, and running autoroute board again it is disable too...

How to enable autoroute board again..?

THX
 

orcad autoroute

I have also faced such problems in the past, what i think is u need to change some of the Autoroute settings, also if u delete one of the report files generated (whixh i think is a text file or another such thing) might help.

But frst check the autoroute settings.
 

orcad layour autoroute

Option -> Route Strategies -> Route passes -> Select what you want (or just double click the header coloumn "Name" to select All) - edit properties -> uncheck "Done" check box.

HTH
 
orcad layout 16 autorute

Hi,

You can also go to the menu: View/Zoom DRC/Route Box and select all your board, then go to: Auto/Autoroute DRC/Zoom Box.

I hope it helps...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top