Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to make pins outside the cell in Virtuoso Layout Editor?

Status
Not open for further replies.
A

Ahmed Atiya

Newbie level 4
Joined
Jan 27, 2006
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Egypt
Activity points
1,337
Hi all,

In virtuoso layout editor, I want to make a cell from my layout and connect it to another cell. The problem is that after making a cell by selecting the layout and executing make cell, the pins are inside the cell and cannot be connected so I want to know how to make the pins outside the cell.

thanks,
 

Re: Layout question

You can just connect by connecting the pins with the same metal layer. Virtuoso will understand this. There is no need to make the pins outside.
 
Layout question

When you make a cell . the connective of layoutxl is miss . you should create pin in the make cell .
 

Layout question

Create new pins in the cell which is made
 

Layout question

if you don't want to creat to new pins, you can connect then with the same layer.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top