Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Wireless access point/bridge

Status
Not open for further replies.
C

creative_35

Full Member level 1
Joined
Apr 10, 2006
Messages
95
Helped
9
Reputation
18
Reaction score
3
Trophy points
1,288
Location
Under Mango Tree
Activity points
2,032
I need Outdoor Wireless access point/bridge with an output power of minimum 500mw for a reasonable price. if you have any suggesssions, pls...
Needed specifications:
POE injector type
with detachable antenna
compatible with 801.1g standard
output power 500mw
2.4 Ghz type

Thanks in advance
 

You are going to have trouble finding the 500 mW version. Your best solution would be to have more antenna gain.
 
Yup! Agreed with flatulent. Normally maximum power transmit for Access Point/Bridge is 100mW (refer to www.cisco.com). For outdoor wireless LAN we interested on antenna gain and antenna type Rx/Tx(13.5dB yagi, solid dish etc) and these factors will effects on distance and power received.

According to formula Pr = Pt + Gt + Gr -Ls
where Pr =power receiver
Pt = Power Transmit (Fixed/constant)
Gt = Transmitter Antenna Gain (variable depend on antenna type/gain
Gr = Receiver Antenna Gain (variable depend on antenna type/gain
Ls = Free Space Loss (normally we keep constant)
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top