Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Input voltage to 110VAC inverter?

Status
Not open for further replies.
C

cupoftea

Advanced Member level 5
Joined
Jun 13, 2021
Messages
2,639
Helped
54
Reputation
108
Reaction score
116
Trophy points
63
Activity points
13,853
Hi,
We are doing a pure sine 110vac inverter.
Its +/-15% so vac can be up to 126VAC.
So max peak is 179V
As such, woudl you agree, we need our VDC input to be 200V?
 

Sort by date Sort by votes
so many questions, so little information

if the source can support it, why not boost whatever the input voltage is to
180V plus whatever overhead one needs to get the desired output?

what's the input voltage?
what's the required output power? available input power? etc etc etc
 
Upvote 0 Downvote
cupoftea said:
Hi,
We are doing a pure sine 110vac inverter.
Its +/-15% so vac can be up to 126VAC.
So max peak is 179V
As such, woudl you agree, we need our VDC input to be 200V?
Click to expand...
No, I would not agree.

(Transformers, you know.)
 
Upvote 0 Downvote
Thanks, i mean the input to the actual inverter itself. The atual input is 18V. We will isolate this, then boost it up to 200v.
I guess it has to be 179V min....just if we pick 179v...then our sinusoidal PWM has to be able to go to 100%.
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top