Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to tring IC 555 with positiove voltage ?

Status
Not open for further replies.
M

mmc01

Newbie level 5
Joined
Jan 9, 2012
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,358
I want to connect PIR Sensor to ic 555 which output of PIR Sensor is logic "1" . But ic 555 will work when trigger pin change from "1" to "0". I want to use output of ic 555 to 12V. How to change input of 555 to work when input is logic "1" ?
 

A simple transistor can have an input of 0V to 1V or more and produce an output of +12V to almost 0V. Then the transistor will be an inverter and a level-shifter.
 
  • Like
Reactions: mmc01

    M

    mmc01

    Points: 2
    Helpful Answer Positive Rating
555 also can also be operated on 12 volt or as Aidioguru said you can use transistor as switch.
 
  • Like
Reactions: mmc01

    M

    mmc01

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top