2ndhandscope
Newbie level 4
Hello,
I cam across a video on you tube,
Ratiometric config with RTD
and this video is from TI by the way :
![Untitled.png Untitled.png](https://www.edaboard.com/data/attachments/44/44232-8297a0c7a1f2e07ac71c192287e739ca.jpg)
In the video, the lecturer says the ADC_Dout= Vin * Gain * 2^24 / (2 Vref). I believe this is incorrect, it should be just Vref , am I right ?
Thank you !
I cam across a video on you tube,
Ratiometric config with RTD
and this video is from TI by the way :
![Untitled.png Untitled.png](https://www.edaboard.com/data/attachments/44/44232-8297a0c7a1f2e07ac71c192287e739ca.jpg)
In the video, the lecturer says the ADC_Dout= Vin * Gain * 2^24 / (2 Vref). I believe this is incorrect, it should be just Vref , am I right ?
Thank you !