Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to draw a type T?

Status
Not open for further replies.
T

Tomsin yin

Banned
Joined
Mar 6, 2014
Messages
61
Helped
5
Reputation
10
Reaction score
5
Trophy points
8
Activity points
0
hello,now i am doing a T type power divider(4 way),but i can not draw the microstrip line.Somebody can help me？Thnx
 

If I understand your need, you would better get the 4-way splitter in two stages: a 2-way splitter whose branches are split again with 2-way splitters.

Z
 
BE64C521-ED9C-4877-9263-10D08D52B255.jpghi,zorro,
thank you for your help! now i undersyand,but i don't know how to calculate the length of the branch.
 

Hi Tomsin,

You must calculate lengths and widths of the microstrip parts in order to obtain matching.
There are 2 parts:
1) design of the parts: electrical length (for example one quarter wavelength) and characteristic impedances
2) design of the microstrips: physical lengh and width

Z
 

ok.thank u!i know what you said,but some details are not clear!tomrrow i will search the website to know more.by the way,i am a Chinese,my English is not well,so i can not express my question clearly,but i believe i can learn more from here.thanks for your help again.
 

Hi Zorro,

I want to know following

1) Lengths MBend or MTee in ADS are included in microstrip length or not ?

2) If we want bend a straight Microstrip line into ''U'' shape structure then how to find Mcurve lengths
 

hi,kuhnny,
let me have a try to answer your question.
1) the microstip length include length MBEND,but the length of the MTEE is zero,it is only a joint.
2) the equation L=θ*r,where the r is the radius and the θ is the radian of the Mcurve.for example,if r=3mm and the angle is 90º,then L=3*π/2=3*3.14/2=4.71.Good luck to u!
 
  • Like
Reactions: kuhnny

    K

    kuhnny

    Points: 2
    Helpful Answer Positive Rating
Here you can find how to do the connections and the equations for line impedance and resistor values, for a 4 ports Wilkinson divider.

 

hi,vfone
thanx for your help,can you give me some examples without the resistor R，because my design don't use the R!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top