Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ansys HSFF simulation error while designing the probe patch antenna

Status
Not open for further replies.
R

rohitpintusurya

Newbie level 3
Joined
Sep 17, 2013
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
21
hi,

As I am a beginner and this is my first design(probe patch antenna) in Ansys HFSS simulator, I am facing a problem i.e an error(warning is created will "checking all" . the error is in "boundary and excitation" part (to surfaces are overlapping ) .

I am attaching a rar file(probepatch.rar) which contains the design and result part .

help me guys .

Thank you :)
 

Attachments

  • probepatch.rar
    11.1 MB · Views: 114

Welcome rohitpintusurya,

While I only have HFSS 13, it appears that you've assigned the radiation boundary to all sides of your vacuum box - including the bottom face to which you've also applied a PEC boundary. You can't have both applied simultaneously - delete the radiation boundary. Select all faces of the vacuum box except for the bottom face, the apply the radiation boundary. Also, your PerfE_patch PEC boundary should NOT have "infinite ground plane" checked.

Also, for future reference, you do not need to attach the .results folder - it will usually be very large, and is not needed to transfer the design. Just the .hfss file is needed.

Good Luck
PlanarMetameterials
 
Thank you very much for your support PlanarMetameterials.
I will implement those changes to it .

:)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top