Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

doubt in rc circuit about charging time

Status
Not open for further replies.
B

Bhuvanesh Nick

Member level 1
Joined
Aug 22, 2013
Messages
33
Helped
1
Reputation
2
Reaction score
1
Trophy points
8
Activity points
201
Screenshot (18).png


is my above circuit correct

!my idea is to to on the led after some times..to do so how to calculate the time
 

charging equation of RC series circuit.
vc = v(1 - e-t/rc)

In this case capacitor will never charge more than 0.7 V that is LED's forward voltage drop.
 
vyomax said:
charging equation of RC series circuit.
vc = v(1 - e-t/rc)

In this case capacitor will never charge more than 0.7 V that is LED's forward voltage drop.
Click to expand...

from what i learned capacitor charges 60% of supply voltage and then it supplies for led .am i right
 

vyomax said:
charging equation of RC series circuit.
vc = v(1 - e-t/rc)

In this case capacitor will never charge more than 0.7 V that is LED's forward voltage drop.
Click to expand...

Actually that equation works only upto the point where LED current is very very low. Once the voltage reaches the diode knee, this is no longer valid.
Secondly, I know of no LED whose knee is as low as 0.7v. LED's are typically 1.6v .. 3.2v depending on the colour.
 
kripacharya said:
Actually that equation works only upto the point where LED current is very very low. Once the voltage reaches the diode knee, this is no longer valid.
Secondly, I know of no LED whose knee is as low as 0.7v. LED's are typically 1.6v .. 3.2v depending on the colour.
Click to expand...


Actually u r right. LED produce around. 1.3v
I just considered it as a pn junction diode.

- - - Updated - - -

Bhuvanesh Nick said:
from what i learned capacitor charges 60% of supply voltage and then it supplies for led .am i right
Click to expand...



The equation is just for reference
in your circuit it is not valid for all t (time)

Capacitor will charge only upto forward drop across LED. remain there forever
It will not charge upto 60%
 
kripacharya said:
Actually that equation works only upto the point where LED current is very very low. Once the voltage reaches the diode knee, this is no longer valid.
Secondly, I know of no LED whose knee is as low as 0.7v. LED's are typically 1.6v .. 3.2v depending on the colour.
Click to expand...


Sir,capacitor has infinite resistance.so in that way,why dont it charges first and then supply it to led
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top