Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Need guide for Hfbr ic circuit !!!????

Status
Not open for further replies.
W

WidElectronics

Newbie level 6
Joined
Aug 27, 2013
Messages
14
Helped
2
Reputation
4
Reaction score
2
Trophy points
3
Location
Bangalore, INDIA
Activity points
97
Hi all,
Transceiver.JPG
Above I have attached an image of the circuit.. Any one plz guide about its operation....:?:
HFBR is a transceiver and ic name is not given...
U1F is 7414 ic- hex inverter ic...
In HFBR pin no.1-RO(receiver o/p), 2-(RE-active low), 3-DE(data enable), 4-DI(data i/p), 5-gnd,6-A/Y(it is input if DE=0, o/p if DE=1)noninverting receiver i/p or driver o/p,
7-B/Z( same as A/Y but inverting),
8-Vcc
Hoping for solution...:grin:
Thanks in advance:)
 
Last edited:

sorry for that...pin no. 7 and 3 are grounded... and inverter 12th pin is given ti cpld-144... this might b useful..
actually if pin no.3 grounded means 6th pin is input->hfbr is receiver...but then it is given to inverter input...thats y i am confused.... s it right??? plz...tell me
 

same to me. does this circuit work?!!!!!!
if it does, you might made a mistake with the pins descriptions. it should be something else.
 
mohammadyou said:
you might made a mistake with the pins descriptions. it should be something else.
Click to expand...
Yeah... thank you....as u say pin description is different... After searching and analysing other schematics now i come to know that ic no. is 2414.....
It has photodetector and on 6th pin it has received data.... pin no.2 is Vcc..
Again thank you for replying and guiding me....:smile:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top