Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

voltage to current converter in single supply.

Status
Not open for further replies.
H

HIREN DAVE

Junior Member level 2
Joined
Apr 18, 2013
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,430
Hi,


I have 1 source that gives me 10V and 2mA. I want 5V and 10mA from this supply.. I have no other source. Is there any technique to increase current by decreasing a voltage????
 

You want 50mW but your source only gives you 20mW. So it cannot be done.
 
ok. got it...

Now, my another question is I have a point source of 0.75V and 1.3mA. From this source, i want to generate 3.3V and 750mA. Is there any other option to get these much voltage except increasing no. of sources???
1 option is to use around 2461 sources and connect it to series or parallel to generate this much voltage. Any other option???
 

No. You cannot get 2.5mW of power from a single 1mW source.
What is the nature of these 'point sources' and why have you picked the unusual number of 2461?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top