Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Power divioder power rating

Status
Not open for further replies.
B

bhagavanec67

Member level 1
Joined
Feb 23, 2013
Messages
34
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
Hyderabad
Activity points
1,507
hello everybody,


how to define a dynamic range of a power amplifier. I gone through the POZAR text book for POWER divider but failed to found it. Please help me regarding this.

Thanking you all
 

the lower limit: input a low level signal, until you can tell the amplified signal and noise floor in SA.
the upper limit is P1dB.
 
Hello every body,


Thanks tony. I am trying to fix all other parameters of my design keeping power handling a side.


i designed divde with center frequency of 2 GHz with 50 ohm termination at both input and output ports. Now all i want is how can I calaculate the MIn and MAX input RF power that my design will accept. If any calculation part is there please let me know. I came to know that PCB material will also one of the factors of Power handling. Kindly guide me through this problem to vanish my doubts.

Thanks and regards,

Bhagavan
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top