Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Altium 10: Components refer to a previous library.

Status
Not open for further replies.
G

grizedale

Advanced Member level 3
Joined
Jun 13, 2011
Messages
838
Helped
17
Reputation
34
Reaction score
17
Trophy points
1,298
Activity points
8,804
Hello,

I have a PCB project which is called TESTJIG-1

I keep on updating it to be called TESTJIG-2 , TESTJIG-3, etc etc.

The scm, pcb, scmlib, pcblib are called TESTJIG-X too (where x is the corresponding number)

Anyway, i am on TESTJIG-5 now, and the preceeding ones are stored away for safe keeping, just in case i ever need them again.

Anyway, i noticed that the footprints in the pcb editor are still referring to PCBLIB-3.

Why havent they updated to be looking at PCBLIB-5?, after all, PCBLIB-3 is no0t in the current project.
 

Just we can install new PCB LIb to libraries, then it will be update
 
how do i update so that my schem and pcb look at PCBLIB-5 rather than PCBLIB-3. (i mean, its the same componants in each library, bar one or two, just different name library)
 
Last edited:

1st in libraries install pecblib-5 then schematics--> tools--> foot print manager, here we can assign footprints to each component form PCBLIB-5, then update to schmatics to PCB
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top