Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Any good dual 4 pin NOT gates?

Status
Not open for further replies.
S

strongdrink

Junior Member level 2
Joined
Sep 27, 2011
Messages
23
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,434
Hello all,

I am looking for a very small dual NOT gate IC with only 4 pins. I couldn't find any via google or various sources.. Do you know if they exist in such a small size? or is an 8 pin the smallest?

Thanks
 

I am looking for a very small dual NOT gate IC with only 4 pins.
Click to expand...
Sounds confused. I count 4 signal and 2 supply pins for dual NOT gate. Dual NOT in 6-pin package is pretty standard.
 
ON Semiconductor NL27WZ04: Dual Inverter

OnSemi has many good logic gates. NL27WZ04 should work for you if your supply voltage is 1.6-5 V.
If this one doesn't work, find another chip from the website.

Hope this helps,

Microwave123

P.S. you can use NAND or NOR gates as inverters if you have any spares from other parts.
 
Thanks Microwave! Is it even possible to have a not gate without a supply voltage? (4 pins for dual gate).. would be interesting..
 

Is it even possible to have a not gate without a supply voltage?
Click to expand...
It isn't possible. Even if the gate had an internal energy source to drive the outputs, it would need a ground pin as voltage reference. Are you yet using logic ICs?
 

@FvM -- yes, I have been using logic IC's. Come to think if it, that was a stupid question :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top