Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Please give me some hints of poles and zeros identification from blod plot

Status
Not open for further replies.
I

idbi

Newbie level 3
Joined
Dec 17, 2010
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,304
Please give me some hints of poles and zeros identification from bode plot

I need to recognize poles and zeros from a test result (mag and phase to freq).
However all I know is about the typical and ideal case. Could anyone can give me some hints to recognize them from phase or mag. plot in complex scenario, such as with huge noise?

Thanks!
 

Sometimes Its very difficult to recognize in complex scenario. I think you can get idea of poles and zeros location with the help of magnitude and phase plot analysis together.
But I will suggest to understand ideal response for simple pole-zero combination.
 
  • Like
Reactions: idbi

    I

    idbi

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top