Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Exactly, its okay, How I would measure, I would like to know the technique, its okay, let me know the way or technique, that I should measure the Current density in the coil or in the Aluminum plate, not by graphical way, I would like to measure it by using the Field Calculator.
Your help...
1695884703
1695885286
Oh God, I wrote that I would like to find that by using the Field calculator, if its possible to measure the Average value like that (J Volume/Current Density).
There must be some calculation through which we can calculate.
Regarding to my Project: I designed a Coil and...
Hello Guys, I would like the know how to find the J Volume/ Current Density by using the Field Calculator in HFSS. Your help will be appreciated, Thanks in Advance
Hello all, I am asking a Question regarding to the HFSS, as I design the coil and I would like to find the (Volume Loss Density) in the Core using a field calculator in the HFSS giving a different Current.
Please help me out, How do I calculate the Volume Loss Density in the Core Using the...
Hello, I design a coil in Ansys Maxwell, I found the inductance of that coil, and I also put segments (i.e Capacitors) after every turns of the coil by finding the impedance and giving that value to the capacitor, Now I would like to find that the current and voltage in the coil that will be...
Thanks for you Answer, The coil is a conductor, what is your opinion regarding to the Lumped Port and current as well as the RLC Lumped.
How should I give that value at the same time, because I would like to find out the S-paramenters and reduction of Current and voltage by putting the segments...
hello, I would like that. How should I find it in the HFSS using Solution Type (Driven Terminal)? I would also like to add the lumped RLC (by putting the capacitor value as in series). Also, i would like to add the excitation of current or voltage in the coil, as well as using lumped port in...
Kindly download the zip file ... You will better know what I would like to find,( Again according to the theory: When AC voltage is applied to the series circuit, the capacitor and the Inductor will begin to exchange energy back and forth b/w their electric and magnetic field, which can cause...
My simulation is adequately converged, friend, let me show you the actual coil and what I would like to find. These are the Figures...For example the voltage and current must be drop after the capacitor and i would like to finmd the how much current and voltage drop... and the 3rd picture I...
Exactely I am using the field calculator, but I did not get the exact value. For example, if I give the input 100 A in the coil, after the capacitor, if i would like to check, i get the value 0.00121, or some such thing (which does not make sense).
Please help me out or show me some other way...
Hello friends, Please help me out regarding the problem I am facing, I would like to find the voltage and current after each wire of the coil, (here I put some segments (segments are capacitors)).
I'm not sure how to find the voltage and current (which must be reduced because of the...
Hello, I am getting an error (Current leak to the air.) in my simulation, please help me out that where I am doing a mistake, as I search it on google, most of the students write that change to the classic mesh but in 2022, I did not see the option of classic mesh.
the conduction path is okay as...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
