Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
picstart plus programmer rar
Hi X,
I will have to trace the board. I don't have a high resolution digital camera, but the photo will not really help now, because the back is mostly filled with copper pour, and a lot of detail is hidden from view. I.e. under the dip socket and the processor...
picstar schematic
I'm working on tracing the schematic off the PUM. It is not easy, it's a doublesided board, with tracks hidden under processor, and 40pin dip socket. When I am finished, I will post it.
Regards,
Whacko.
Hi FoxyRick,
When you try the acetone or other solvent, don't put too much solvent on and don't press down too hard. Make sure the copper is clean and oilfree.
Let me know after your first try. If you have some hassles let me know, I will assist you, but I'm sure you'll get the knack of it...
Coated paper is for higher resolution printing, I use the HP premium paper. You can get it at most stationary stores, and is actually meant for inkjet printers. But Yes, you can use it in lazer printers. It is relatively inexpensive and can really improve the time from artwork to PCB. It is...
modified aquarium heater pcb etch
Why do you want to use the Lazer printer to print negatives for exposure? You can make great boards, including doublesided using the lazer printed page itself as the etch resist. I have done it for long time, with excellent results. All you need is "Coated...
picstart plus schematic download
I don't have the schematic. I was hoping someone do have it, but if nobody has it, I can buy the upgrade (PUM) module and do a schematic of the hardware. Then I can post it here.
Whacko.
18f6720 config bits picstart
Hi stroma,
I don't have the upgrade module, was thinking to make one up myself, I have the facility to do the TSOP on the required size PCB. I am from South Africa, the exhange rate to US$ and our currency is not good for me. The going price is US$29.99 which I can...
schematics of picstart plus
Hi PICUser,
The upgrade module is almost like the "Basic Stamp" module and uses a PIC18F672 TSOP device which is on a board that matches the 40pin size of the 17C44 and just plugs into the IC base socket as you would plug in the 17C44. Can you get your hands on...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
