Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by violat

  1. V

    using 100 ohm diff pair trace as 2 single ended signals

    Assuming low speed ~5 Mhz single ended digital signals - do you still see a problem? and besides crosstalk - do you see other issues? Thank you Klaus for your reply. Viola
  2. V

    using 100 ohm diff pair trace as 2 single ended signals

    Hi , can I use 100 ohm differential impedance traces as 2 unrelated single ended LVCMOS 3.3V signals ? Thanks Viola
  3. V

    THERNET MDI 1000BASE-T pairs length on pcb vs long cable

    Datasheets of PHY'S or ETHERNET SWITCHES with integrated PHY'S sometimes specify max length of several inches for the MDI pairs. but , it seems to me (like you said) that longer routing on the pcb is possible as long as you route it with controled impedance, clearance from other signals ...
  4. V

    THERNET MDI 1000BASE-T pairs length on pcb vs long cable

    Hi , I see sometimes MDI pairs length limitations in Datasheets of components of a few inches (regarding the PCB routing length). Why is there such a strict limitation if after that the ETHERNET cable can be 100 meters long? Will it not work correctly even if the MDI pairs length on the PCB...

Part and Inventory Search

Back
Top