Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by swavvv

  1. S

    amplifier 50w 20hz frequency responce

    So what is value of transformer need for that (volt, amp).
  2. S

    amplifier 50w 20hz frequency responce

    Subwoofer 60w, rs= 50 hrz, 8ohm
  3. S

    amplifier 50w 20hz frequency responce

    Hi, I have subwoofer of 50w 50hrz fs. Which apmlifier ic is suaitable for this, which operate on 14v? (TDA series) - - - Updated - - - Sorry 60w subwoofer
  4. S

    sub-woofer encloser size problem

    i have another Woofer which is ok for real bass effect? **broken link removed** and which size we need to construct enclosure
  5. S

    Home Theater Bass Box Design

    ok thanks, i will check with this sizes - - - Updated - - - i have one more Question, can i use this type box( http://obrazki.elektroda.pl/3410931200_1390114378.jpg ), sub-woofer at a bottom, if this we use, then what is its dimensions required.?
  6. S

    Home Theater Bass Box Design

    thanks, i think single tuned bandbox box is ok for me for 6 1/2" subwoofer. can you me whats is dimension?
  7. S

    Home Theater Bass Box Design

    Hi, I need a home theater bass box for 6 1/2 " & 8" Subwoofer 60W. any one can Help me.
  8. S

    sub-woofer encloser size problem

    i am building a home theater, i am observing many home theater which used 5" 1/2 to 10" Sub-woofer. so how i will use 6 1/2" sub-woofer and what is its sizes?
  9. S

    sub-woofer encloser size problem

    i m using this sub-woofer **broken link removed** also i am using low-pass filter for this, any idea about which size enclosure is ok?
  10. S

    sub-woofer encloser size problem

    can you suggest me for 6 1/2" 60W sub-woofer which type enclosure is ok for better performance?
  11. S

    sub-woofer encloser size problem

    sub-woofer enclosure I have Sub-woofer enclosure, but cant give good performance. enclosure details as follows: enclosure size: width =8", depth: 8", height:12", MDF size: 8mm Amplifier : TDA7265 bridge 50W Port tube : depth 4", diameter 4.4cm Subwoofer : 6 1/2 " 60W...
  12. S

    sub-woofer encloser size problem

    ok thanks i will check it
  13. S

    sub-woofer encloser size problem

    can you give me a perfect size like home theater subwoofer box?
  14. S

    sub-woofer encloser size problem

    ok thanks, but dimensions are ok which i am used?
  15. S

    sub-woofer encloser size problem

    i am using 4mm mdf thik which is used commonly used for home theater, and amplifier i am using TDA7265 bridge, which gives 8ohm 50W output
See more

Part and Inventory Search

Back
Top