Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by sivani_vs

  1. S

    I want any 8051 programmer

    8051 parallel programmer its better to to go through the ayyala text book
  2. S

    8086/8088-based project or any applications using these MPUs

    Re: 8086/8088-based project or any applications using these hai friend u might be aware of the level control system then why dont you try to automate using 8086
  3. S

    Four calculation problems related to ADC

    Re: ADC's? two signals 1.start of conversion 2. endof conversion connect the analog input to the adc. apply thge SC signal low. ADC will start converting the data . the analog input of the adc is given as one input to the comperator. the second input is the ref. signal. it starts comparing...
  4. S

    Nanotechnology - Is it useful?

    hi nanotechnology is the present emerging technolg . nano sensors and anano bio sensors are making revolution inthe present life
  5. S

    Memory Compiler Question

    compilers are C compilers , Cross compilers . It converts the user defindaceptable codes to bin code ie. machine language .
  6. S

    process control and instrumentation

    I need practical oriented testbook on precess instrumentation thank you.
  7. S

    Looking for books about data converters

    Re: data converters Hi u must specify the type of dat to be converyted practical Data aquisition and instrumntation is the bets book for u. Elsaviour publications
  8. S

    comparator compared with amplifier?

    hi friend The compare operation if performed on two inputs . one is the analog input and second is the ref. input. If the analog input is greater than the ref input your o/p will become one(high). else zero(low). most ADCs 0804,0809,0808 will use the comparator as an input to the ADC to set or...
  9. S

    Blog about Embedded Basics Skills

    Re: Embedded Basics dear friend Do u have knowledge on microcontrollersOr even microprocessors. If so you must be strong in C language and even unix also then I dont think BAsics may not be a problem thank you
  10. S

    MBA After Engineering?

    why to do mba after engineering Dear friend you have not specified the branch of ur b.tech degree. MBA may be more advisable for Mechanical graduates if u r seaking aposition as an HRD of a software industy it me preferable with B.Tech comuters backgound Thank you
  11. S

    microstrip array design

    this may help u. Added after 1 minutes: this may help u. https://www.ladyada.net/techproj/freshair/doc/antenna/new%20consid%20microstrip.pdf
  12. S

    Looking for Verilog code of digital alarm clock

    digital alarm clock using vhdl see this site for the program **broken link removed**
  13. S

    what the difference between light emitting diode&laser d

    Re: what the difference between light emitting diode&las this is some material **broken link removed**
  14. S

    N-type & P-type semiconductors

    see this material **broken link removed**
  15. S

    Why zeners are generally employed in regulators?

    Re: regulators it is very clear that stability and accuracy is generally good enough for the zener diode to be used as a voltage regulator device in common power supply circuit.for more information u see this website https://www.allaboutcircuits.com/vol_3/chpt_3/9.html
See more

Part and Inventory Search

Back
Top