Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by shahinjc

  1. S

    FM Modulator/Demodulator Using Verilog on FPGA

    Thank you for your answer The deadline is in three day Can u show me the block diagram or any other example so i cab understand the method you said ?
  2. S

    FM Modulator/Demodulator Using Verilog on FPGA

    Hey guys My project is implementing FM Modulator and Demodulator using Verilog . I don't have any clue how to do that . And i'm in hurry and deadline of project is so close . Anyone here can help me or has any tips or ideas . I would appreciate any helps .
  3. S

    Choosing Microcontroller and ADC

    thank you , you are the best , soon i will contact you , thanks for your helps - - - Updated - - - thanks you are right , this was really helpful , i'm gonna use 14 bit ADC
  4. S

    Choosing Microcontroller and ADC

    when i search i see these ADC's are high frequency but my frequency is 50 HZ do u any microcontroller compatible with these ADC's?
  5. S

    Choosing Microcontroller and ADC

    thanks for your suggestion , actually i just worked with AT mega series microcontroller are the for example PIC18F4553 is the same with AT mega ? can i program it , and my process which i'm gonna do on this information is not complicated so i just need cheap microcontroller you seems master in...
  6. S

    Choosing Microcontroller and ADC

    hi guys i have voltage between 500 microvolt to 5 volt then it passes from a amplifier , i need a 12 bit ADC , my frequency is low about 50 hz do u guys have any suggestion what ADC i choose ? i need a cheap ADC and after ADC i need to process that information with a microcontroller , do u...
  7. S

    high input range amplifier

    thanks i'm gonna stick to ADC cause i need to process the information with a micro controller
  8. S

    high input range amplifier

    thanks this is really helpful yes my frequency is low and it's between 40 to 50 hz , so what op amp do you suggest? , i myself found AD620 ,and i think if i set the VS to 6.5 v then my input can be in the range of 500 micro to 5 volt , am i right ? :) and what cheap 12 bit ADC do you suggest...
  9. S

    high input range amplifier

    thanks but i need that the input voltage of this amplifier from range 500 micro volt to 5 volt and in PGA202 data sheets i didn't see its input range , are there anything else ? a good op amp or somthing?
  10. S

    high input range amplifier

    hi guys i wanna build a volt meter from range 500 micro volt to 5 volt i need a front end amplifier or op amp which support this range as its input any suggestion?:-o
See more

Part and Inventory Search

Back
Top