Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
fifo implementation in vhdl
arena_yang you can also learn a lot looking
at how people at
http://www.free-ip.com/ramlib/fifo.html
implemented async fifos in vhdl. You can
download full source code there !
Greets
sgrudu
Yes I want to work with it. But have not
much time now.
I would implement it on the m*emec Sp@rtan-II 200 board with ethernet and serial core from open cores too..
but I didn't check if that would fit in a sp@rtan-II 200.
Let's use this topic in the forum to keep in touch on progress we make :-)...
This pdf summarizes differences between 2.2 and 2.3.
Hope this helps.
You can find full 2.2 and 2.1 specs on MCU Fileman.
If you can't find 2.3 on this board then ask here and I or someone
else will post them here.
Greets,
sgrudu.
PS
I think we can safely move this topic to
"...
I'd like to hear experience about Open RISC 1000 Core too !
Recently I've talked/asked here about @ltera n1os and x1linx M1croblaze but I forgot
to mention this core which seems very promising..
It's free, it has a free working toolchain (gcc , gdb etc..) and a free operating system
running on...
X1linx virtual shop does not sell FPGA's
Instead you can buy even single units from:
https://www.rs-components.com
this international site redirects you to the site of your country.
It is in most countries. I use it in Italy.
Greets,
sgrudu
hand solder tqfp
Eh eh, the application note from the link above
(from cygnal.com) is identical to the article
published in CIRCUIT CELLAR #142, MAY 2002
pointed by ZeRoN.. In fact, reading from the article
you see that the author works for Cygnal :-)
Greets
sgrudu
It depends on which FPGA you want to use.
On Xilinx site you can find the schematics
of the Virtex-II pro ML-300 eval board, the one with the touch pad lcd screen. :-)
It has a 10/100 eth interface, among tons of
other interfaces. But that board is quite complicated.
Here is the link...
Yesterday @ltera annouced version 3.0 of n1os soft processor core. Also x1linx m1croblaze stuff
is in big development. It seems we'll see in the future lot of applications working with
these soft processors.
I've ordered an ins1ght xil1nx proto board and as soon as I can will give a try to...
Interesting idea :-)
Here you will find lots of links of free eda software running under linux,
it's the Free Design Flow of opencores.org:
**broken link removed**
If you want to create a new linux distribution be aware that if a software is free
it doesn't automatically mean that you can...
You must first recompile your gcc to be
a cross compiler !
Get the sources and read the docs
You must run ./configure --target=xxxxx
before running make , make install.
Greets,
sgrudu.
With current known technology and knowledge 3DES cannot be cr@cked, not in the time
of the life of a man :-)
Currently with the budget of a government agency it is possible to cr@ck des in less
than 24 hours but des has 56 bit strength , 3DES is 112bit ... obviously you
must double the cr@cking...
Also Lattice Semiconductors has another solution,
which is quite interesting:
an sram based fpga with e2prom integrated in the
chip!
https://www.latticesemi.com/products/technology/isp_xp.cfm
greets,
sgrudu
X1linx announced few days ago that they will reduce the price of v1rtex-II pro
of the 50% in 2004 !!
This makes that monster of a fpga even more interesting :-)
**broken link removed**
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.