Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
the 16x2 lcd runs properly on the code...
the line 2 and 4 does not display anything...
ok thanks I will try it...
---------- Post added at 19:10 ---------- Previous post was at 18:39 ----------
I'm still having the same problem... black squares on line 1 and 3... no display on line 2 and...
my lcd won't display properly... what could be the reason when I am having black squares in line 1 and 3??
I have tried changing my microcontroller but I still get the same problem... I already check the wiring and soldering...
hmmmm... I am using pic16f877a... could you share a link where I can get a code that I could compile? I have seen many tutorials but I cannot understand what to do and how I will write the code...
so in this 2x16 initialization **broken link removed** I do not need to modify anything? because on the part on the LCD initialization, it says on the comment that "Function Set to 8 bits, 2 lines and 5x7 dot matrix"...
:) If you have an initialization code could you please share it to me...
Please help me...
Could anyone share a URL/Schematic/Code that will initialize a 4x20 LCD using PIC16f877a
here's the datasheet for the LCD http://www.e-gizmo.com/PRODUCT/ELECTRO/Datasheet/Display/sc204a.pdf
I have a 2x16 lcd and I have already initialize it using this code **broken link...
This is the connection written on the back of our coin slot... It is a single coin validator.... I am planning to buy another coin slot, so I could use 2 kinds of coins... But if our budget can purchase a multicoin slot, I will replace this coin slot...
Gray: Counter +/-
Red: DC +12v
White...
Displaying and Keypress is now ok :D
^^ Thanks for all the help...
My next problem is how to connect and code a coin slot and gsm module on pic16f877a
Please help me...
oh it's finally working ^__^ I tried to change the connection from the schematic on the pdf to the sample schematic on the Mikro C lcd library... :D
I am now trying to connect keypad on my circuit... I will ask again later for help if I will be having problems... thanks to all :D
I think I have connected it correctly 'coz I already tried redoing the circuit many times.
:( I wish I could make this work.. especially using the keypad...
I have followed the schematic and used the code on the pdf file, but all I got is this
sometimes it displays random letters/characters.... like it will display a continues F that will fill the whole screen...
what could be the problem??
When I used **broken link removed** the one with LCD...
wow thanks for all the help.
I am still having problem in displaying some text on the lcd but I am still trying some those tutorials that was shared in here ^^ thanks... I wish I could make this work... I don't have much time left to finish my thesis... and I am still trying to learn about...
Could anyone post a link or an example of circuit for pic16f877 interface with a 16x2 lcd with 16pin? please I really need help...
If possible please post a C code for it...
And it will be much better if it is also interfaced with a 4x3 keypad....
I'm sorry... I am a newbie in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.