Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by sara63

  1. S

    How can i use software UART in Codevision(for AVR MCU)?

    codevision uart Hi, I have an AVR MCU (ATmega32) that has 1 UART, but I need 2 UART. I know how we can define software UART in BASCOM but i want to define software UART in Codevision. Is there any body help me? sara
  2. S

    How to configure and use Garmin GPS 18 LVC?

    tia 232 f Hi, Thanks for replying. I connected the GPS to computer and saw its output in Hyperterminal and it was correct When i worked with Bascon(the software of AVR MCU) i didn't answer but when i changed my software to Codevision i answer. I think that my problem was becuase of Bascom.
  3. S

    Gps and AVR microcontroller

    avr nmea Hi, Thankyou for replying. I have a gps(GM-R500).It has a ps/2(femail) port that has 6 pins: 1:VCC 2:GND 3:RX (RS232 level) 4:RXD (TTL level) 5:TXD(TTL level) 6:TX(RS232 level) I use the pins with number 4 (RXD) and 5 (TXD) for connecting Gps to AVR to pins RXD and Txd. RXD...
  4. S

    Gps and AVR microcontroller

    avr gps Hi, I have some questions about connecting a GPS to an AVR MCU. We have a GPS pack that send serial data with NMEA format(GM-R500). It has a femail PS2 connector and we have to use another cable to connect the GPS to the PC which has got 3 head. A mail ps2 for connecting to the...
  5. S

    How to configure and use Garmin GPS 18 LVC?

    bascom nmea sentence Isn't there anybody help me?
  6. S

    How to configure and use Garmin GPS 18 LVC?

    garmin gps wont output without rx connected Hi, I have a gps(GM-R500).I want to connect it to AVR microcontroller.It has a ps/2(femail) port that has 6 pins: 1:VCC 2:GND 3:RX (RS232 level) 4:RXD (TTL level) 5:TXD(TTL level) 6:TX(RS232 level) I use the pins with number 4 (RXD) and 5 (TXD) for...
  7. S

    some questions about connecting Gps to AVR MCU

    Isn't there anybody answer me.
  8. S

    some questions about connecting Gps to AVR MCU

    Hi, I have some questions about connecting a GPS to an AVR MCU. We have a GPS pack that send serial data with NMEA format. It has a femail PS2 connector and we have to use another cable to connect the GPS to the PC which has got 3 head. A mail ps2 for connecting to the GPS femail ps2 and 2...
See more

Part and Inventory Search

Back
Top