Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Thanks a ton for the help!
Could I get a reference as to how the bias generator works( for example the one you have attached ) i.e. the principle of operation; so that when I would need to derive a particular bias circuit, I could do it myself with more of intuitive understanding
Hi Guys!!
I am new to Analog IC design. Could some one please help me with derivation of biasing circuits for a complementary differential pair input for a rail to rail operational amplifier. (Please see the attached .jpg for reference )
Thanks!
Saoni
Hi Guys!!
I'm developing a receiver circuit for an ultrasonic powered neurostimulator. Could someone please help me with extracting clock ( clock extraction circuit ) from a current source (in my thesis, it's a capacitive micromachined ultrasonic transducer-cmut). I need to feed the clock...
The output voltage waveforms should be that of an ideal full wave rectifier. But It is not so ( illustrated in the third snapshot) I need to analyse and correct the circuit specifications accordingly to receive the correct output waveforms
Apologies for placing the incorrect snapshot. Here's the correct circuit for simulation connected to a cmut as a source. The snapshot cmut (capacitive micromachined ultrasonic transducer) is separately provided and modified in the post above...
Analyzing Rectifier input and output waveforms
Hi Guys,
I am simulating a cross- coupled rectifier and need help in analyzing the input and output rectifier waveforms for correcting the circuit.
Need Help!!
Thanks,:smile:
Hi,
I am designing a High efficiency cmos rectifier for biomedical applications. I have attached the circuit along with the output voltage waveforms. Though it is fully rectified, the waveforms tend to extend highly into negative region. How could I possibly size the mosfets to prevent this...
Hi,
I'm designing a high efficiency rectifier.Could you please attach the schematic of the 4-T CMOS differential rectifier ( the symbol which is there in the test- circuit) and tell me the simulation analysis of the same. I'd be really grateful.
Thanks!:smile:
Saoni
Hi
I'm working on the design of a high efficiency receiver that can be effectively used in biomedical applications using ultrasonic link. I have a couple of questions.
1. Can anyone help me out with the electrical circuit of a CMUT ( capacitive micromachined ultrasonic transducer) ? Would it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
