Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hello Guys
i need help finding a very small motor or something that goes up when current goes through and down when there is no current and the object is a very small and weighs almost nothing
and thanks in Advance guys :)
for a
the minimum sampling rate is Nyquist rare which the twice the highest frequency to avoid aliasing in our case the highest frequency is F= (3*pi)/(2*pi) = 1.5
the the minmum sampling rate is F = 2 *1.5 = 3
hello guys...
i have a project to design a circular patch on CST and i did but i the program stops the simulation stops at some level because "matrix cannot be solved " and so i uploaded the File so if anybody got any ideas on how to correct this problem i will be very grateful and thanks
hello i think cross bow tie dipole means the PCB (Prited Circuit Board) Dipole and here is a picture of it ,, and the picture on the right looks like a tie for me :D
https://www.qsl.net/va3iul/Antenna/Printed_and_Microstrip_Antennas/Monopoles_and_Dipoles_Printed_on_PCB.gif
and you will find...
Hello guys
i have a problem with measuring the Bandwidth of a dual band PIFA antenna.
lets look at the following S Parameter figure ,, we see that the lowest magnitude is -7.9dB
so How do i measure it ,, do i subtract -3dB from the loweset value and take -4.3dB as upper and lower cut off...
Hello guys
i have designed a Pifa that works in 900 MHz and i got this shape
i think the problem is in the Feed please if u have any information hot to improve the efficiency of the S Paramater
i need it to decrease to a minimum on 900 MHz
Can anyone help me if u think i have other problems...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.