Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by Rafidul

  1. R

    Help to find equivalent circuit model from .lib file obtained from hfss

    Hello everyone. Please help me to find an equivalent circuit of a microstrip antenna designed in hfss. First I have designed a patch antenna in HFSS. Then I exported its equivalent circuit in a .lib file from matrix data option. Now I want to generate circuit model from this .lib file using...
  2. R

    Wilkinson power divider

    hello everyone.. I have designed an Wilkinson power divider in HFSS. But I am not getting good result of it. Please help. I have attached my hfss file..
  3. R

    100 ohm resistor in Wilkinson power divider in HFSS

    Yes I can use Lumped port. But is there any restriction on the dimension of the sheet? What are practical dimension of the chip resistor available in market ?
  4. R

    100 ohm resistor in Wilkinson power divider in HFSS

    Hello everyone. I want to design a Wilkinson Power divider at 3GHz in HFSS. But I am getting problem in designing 100ohm resistor between the output ports. What should be the dimension(Length width and height) of the sheet for lumped port
  5. R

    how to check temperature dependence of an antenna in hfss

    Hello everyone, is there anyway to measure temperature dependence of the antenna in hfss? I have simulated a patch antenna. Now I want to check the variation of the characteristics of the antenna with temperature in hfss Please help
  6. R

    Autocad to hfss layout conversion

    Thank you BigBoss. Now I can export autocad file to hfss. but how can I control the coordinate position of my design in hfss ??
  7. R

    Autocad to hfss layout conversion

    How to import autocad design to hfss ? I have export an autocad file in .sat format and imported in hfss. but in hfss it shows a different layout. please help
  8. R

    Need help in designing 1:8 wilkinson power divider on HFSS

    if u kindly load the hfss file then I shall be gratefull
  9. R

    Need help in designing 1:8 wilkinson power divider on HFSS

    I have the same problem in designing wilkinson power divider. Its a request to @ Electron3 if you can send me the hfss design the I shall be grateful to you.
  10. R

    [Moved]: Microstrip patch antenna design in HFSS or CST using LTCC material

    Hy every one. I am new in LTCC. I have designed Patch antenna in HFSS before using Rogers substrate 1.5mm thick. Now I want to design it with LTCC material. But I don't know how to choose LTCC substrate and how to design such antenna in HFSS :-? . Anyone please help me. A step by step procedure...

Part and Inventory Search

Back
Top