Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Thank you for your efforts. It is highly appreciated. Yes the orientation is not exactly aligned along xy axis they it is design intentionally like that
In 3D layout model there is option to use HFSS solved and Planer EM solver for the same design and configurations. the dxf of top layer is attached the RO4350 substrate with dimensions 98x15.6x0.508 mm with complete ground
@volker@muehlhaus you are right that both have solvers, for that i try to compare the result for HFSS setup and planer setup. This time design are completely same but results are still different. @PlanarMetamaterials I also do prefer HFSS 3D module but for co-simulation like antenna...
Hi everyone I have design a 2x14 array by using HFSS 3D module and then exported the designed as dxf format and imported it in HFSS layout. When I compare both results they are very much different. The graphs are attached. In HFSS 3D module I have used terminal port for excitation while in...
Dear All I am designing a reflectarray antenna by using HFSS. I have to excite this reflectarray by using a horn antenna. Do anyone have an HFSS manual or tutorial explaining this process. Thanks in advance for your kind consideration.
Dear all I am designing a split ring resonator which is exited by waveguide port but when i simulate the design I get two error message "Illegal usage of S-Matrix, No impedance found error in cst and the other one is "Time Domain Solver (HEX) terminated abnormally" does anyone have any idea...
The Reflection coefficient is S11 when Reflection coefficient Γs is taken as 0 if it will not be zero then reflection coefficient will be different and i am looking for the derivation of this formula Γin=S11+(S12S21Γs)/(1-S22Γs)
Dear all what is the mathematical relation for calculation of reflection coefficient from S-Parameters of a non reciprocal or active RF circuit element
if some could share some paper regarding its derivation İ will be very great-full
Regards
Dear all
I had design a co-planer SRR array in CST, I am facing some problem while generating greber file.
I generated greber file by following method:
Import/export-----> 2D files ------->Greber(Single layer)
after that cst mark the boundary of substrate and upon clicking ok cst...
FEM matlab( mesh generation for rectangular geometry with empty space )
Dear all i want to generate triangular mesh for a rectangular having empty space in center. i had created rectangular empty space by using inpolygon command
[in on]=inpolygon(x,y,vx, vy)
The triangular mesh...
thank you for your reply
Actually i am considering the situation where a static point charge is placed near a bar magnet and i want to calculate energy flow in this situtation
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
