Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi guys , i want to know if can i put a headset with 3 pins 3.5 mm stereo jack into my samsung m10s mobile .
When i tried to slowly enter it i notice that is hard to plug it in the mobile connector !. So im worry for damaging the connector . PlEase help me guys if can i use it with my phone...
look dear , i want to build a switch circuit for connecting 2 sat receivers in the dish motor this circuit have 3 F connectors one for the motor and two for the receivers , when turning OFF receiver 1 the motor will automatically switching to receiver 2 .
Please help me
Hi guys , i want to build an LNB circuit , and i want to know some things :
can the relay pass lnb signal in his switch without any loss ?
What is the required pcb track thikness for the lnb signal ?
I wait your answers thanks
? thanks i found this http://www.electronicecircuits.com/wp-content/uploads/2009/08/timer-with-on-off-delay-circuit-using-ne-555.jpg
On off delay circuit i use a siren instead the relay coil . And the on and off time is set by the two pots , and i set them to run 2 seconds every 5 minutes
Yes audible from the next room i want to use it with water level indicator , by adding a relay with the low level wire so the siren will be active every 10 or 20 minutes to alert .
Re: i need simple water level indiactor
I have experience in electronic and i jave a lot of components .
first i want to confirm if there is any risk on my car for this operation .
And i found a lot of water sensor circuits using transistor and leds but i want to add a beep alarm to the sensor...
i need simple water level indiactor
Hi guys , i need a water level alarm circuit to use it in the radiator tank of my car , i want the alarm getting ON when the water level is in the middle . and i prefer a discontinuous beeps sound as indicator .
Thanks
all alarm systems have a built in auto arme mode , when press the unlock key and no body get in the car the system will lock it self after 30 seconds .
This function is based on the door trigger signal , so when opening the door , a negative (or positive) signal is received on the alarm (blue...
Yes there is a problem when i plug the black test lead to the negatve battery , i found that the negative signal is also present on the red test lead , same problem when connect red clop to the + battery !!!
So the tester is work like a jumper wire !!!
It can be burn the car ??????
I am really...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.