Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Yes my modem is connected to the network correctly because I am having AT commands to connect to client and it connected well and then i can receive the events but when I use TCP create client API inside a task inner event this problem is appearing (that is no events come although the...
Thank you alot for your reply
I tried what you said to me and now the Open TCP client API works well but there is a small delay
reach up to 30 second to give an error that it cannot connect to server can this time be reduced ?
Assalamo 3likom
Dear all ,
I am facing a big problem using wavecom os .
when I call wip_TCPClientCreate inside the Inner Event handle (using adl_waitEvent) , there is no event come !!!!!!! although I am putting a event handler !!!
a big delay happen with no response
I am using...
push button problem
hi all ,
I need a circuit to take the pulse o/p from the push button then make it accurate
.there is a distortion in the pulse although I use pull up resistor=10k and a capacitor 1nf
what should i do ?
thank you alot
By any normal pic programmer by serial (as JDM programmer) using winpic800 or picpgm
you can see the examples in
c:/program files/Mikroelektronika/mikroBasic/Examples/EasyPIC5/Extra Examples/USB HID/P18F4550/USB_HID_test
I advice you to begin with learning hid class as the example shows.
Re: peak detector design
thank you alot Petre Petrov
1. To detect the positive peak?
yes,i need to detect postive peak.
2. Frequency from approx 0 to 100 kHz?
frequency is fixed 100khz but i can change it to 1khz .
3. Tested at 5000mV p-p?
yes,from 0 to 5 v
4. Accuracy in amplitude better...
Re: peak detector design
thank you alot for the replies.
Now what i should do ? i tried more with my circuit .it works well but i didnot achieve my gool (peak detector with 5mv senstivity).my application is RC meter and i used peak detector as a small (but its very important) step .can you help me?
Re: peak detector design
thank you.
I put var resistor to solve the problem of voltage offset .The comparator is TLC372
.The error is changed randomly and it is about .3 v and i want senstivity 5mv
Re: peak detector design
thank you alot
I used opamp TL070 instead of LM358 and i decreased C1 to .5uf but it still inaccuracy.i need 5mv senstivity .can you help me?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
