Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by mlynek

  1. M

    How to Manipulate AT91SAM7S256 Pins

    Hi, Look at the data sheet for register description. You need to configure pin as output and write data to output register in order to change state
  2. M

    how to run a servomotor(sm105 or turnigy tg9e) using pic 18f452

    hi, check if your pulses width are correct. See the page **broken link removed** for more info
  3. M

    I need to send the data to PC from my MCU via USATR.

    Hi, You can also look at https://www.docklight.de/ For more specific data types, i guess you will need to write your own program on PC. I suggest to use Visual Studio Express. The Serial Port port useage is quite simple.
  4. M

    GPS interfacing with Atmega8

    I don't know your receiver but most probably you need to connect the device to the UART and read NMEA strings: http://www.gpsinformation.org/dale/nmea.htm
  5. M

    QNX realtime operating system

    Hi redflower regarding your QNX topics lets look at the excellent online guide: https://www.qnx.com/developers/docs/6.5.0/index.jsp
See more

Part and Inventory Search

Back
Top