Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Yeah I may use one of those indeed to drop the 12V to 6 and then low-noise fast transient response LDOs to get 5V and 3.3V because definitely I don't have room for any kind of heat sink.
Yeah that's what I'm fearing. I don't have the space for a massive heatsink. I will have to drop from 12 to 8 or 9 and then to 5 or put a switching regulator.
That's why I'm asking, I've seen that there are thousands and I ask the community for advice to find a good solution. I barely know the 7805, is it a good quality regulator?
Thanks anyway for answering.
Hello everybody
I'm recurring to the collective knowledge and experience for my issue. I have to find a linear regulator that can withstand the condition where it has to manage a 12V input to regulate a 5v output @ 1A.
I need it to be linear since there is no space or budget to put a switching...
Hello
Basically, a capacitor is a device that stores "energy", is like a battery that charges and discharges very quickly. You see them in every electronic circuit for this reason. For example, in a digital circuit, they provide a quick and fast source of energy to the ICs on a digital board...
a.) The volatile keyword is fundamental in embedded systems
b.) What are the stack and the heap and what are these used for
c.) Multitasking and task synchronization mechanisms
d.) Advantages of multitasking
e.) MACROS
In your experience, what RTOS is the best for PIC32?
Hello everybody
Based in your experience, what RTOS performs better in the PIC32? I'm currently starting to use FreeRTOS but I don't know if this is the best RTOS for PIC32. I have seen some kind of benchmarking results between RTOSes here...
Hi anilrock87
What's happening is that I'm using the VGA 32-Bit controller in an OpenBus project (**broken link removed**). I have already connected to the OpenBus interconnect and to the OpenBus bus arbitrer, so there is no more configuration to do. In the code I've added in the SwPlatform the...
Hi everybody
I'd like to know if someone has worked with OpenBus with SwPlatform and the VGA 32-Bit controller OpenBus module in AD10. This because I can´t make it work :-?!! and all examples provided by ALTIUM are with their TFT display on the NB. I'm working with a custom board with a 8-Bit...
Hi grizedale, being at PCB editor just follow these steps.
Select Any Mechanical Layer or any layer that you want to use as board shape, for example Mechanical 10. Just be sure nothing but board shape is in this layer
press "P" then "U"
Click wherever you want and drag to the desired diameter...
Thanks for answering
What I can tell is that little after posting this thread and no receiving any answer I gave up, disconnected the FET and voila!! the coda was running. The reason for this post at the beginning was that with PICs is different, and I thought I was going to find something...
Hi
Do anybody know how can I download my code to the MSP430 from IAR EWB? I'm able to debug but I can't find the option to just compile anddownload my code to the MSP
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
