Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by Lincolne

  1. L

    ask about programming uvision at the video TISHITU Part 3/3 of 8051 microcontrolled

    you create a file,but you didn't add the file to the project!
  2. L

    ask about programming uvision at the video TISHITU Part 3/3 of 8051 microcontrolled

    Re: programming keil at the video TISHITU Part 3/3 of 8051 microcontroller click the Project--options for target...--out put,you should check the "Create HEX file",and then rebuild your target,you will find the hex file in you project folder!
  3. L

    [PIC] SPI communication problem between PIC18 & STM32F4 Discovery

    I see you configure the MISO pin and SCK pin as AF mode,if stm32 as slave,I think you should configure it as input mode.However I'm not sure.
  4. L

    [SOLVED] problem on receiving message from GSM

    You can use an oscilloscope to test the waveform at RXD point,to make sure was there any data in.and then if there was,it must be errors in your program.

Part and Inventory Search

Back
Top