Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
telit gm862gsm
US$35 with GPRS is impossible today, however, for GSM only, there are:
SonyEricsson GM29 Insight-Memec
Siemens' TC35 Impact-Memec
You can visit www.memec-asiapacific.com to find the information.
navman in car integration
For the GPRS module, there are many:
SonyEricsson's GM47, Gm48, GR47
Siemens' MC35
Cellon's CMS91
For GPS module, you can find:
u-Blox's TIM
Re: dial-up in uClinux
You should not use PPP, as PPP will do too much thing than normal GPRS connection.
For connection with GPRS: you need two AT commands:
AT+CGDCONT=1,IP,156.090.123.076
ATD*99#
Please note that the above two is just a example, you need to consult your operator for the...
Hi All,
It is odd that you need the PPP operation by all means, unless you are using the mobile module to dial-up to an ISP.
Normally, my experience is that, after activate the GPRS, you just need to send up one side as server (listen to a local port), and the other side as a client (connect...
mcu gprs
I have worked with Ubicom's IP2022 with SonyEricsson's GM47, for the GPRS application.
Please note that when working with GPRS, you need not to handle the PPP.
PPP is basically a protocol for login a system for charging only. But in GPRS world, you are already billed with your SIM...
Re: pci cardbus bridge issue
I am also looking for the cardbus specification, however, many told me that PCI and Cardbus are similar, just Cardbus similar to PCMCIA has power management, and also some initialization process when plug (CIS).
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.