Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Re: PCI card drivers
Try lookin into the source for Linux. You will find the drivers for a lot of drivers there. Also you may look into sourceForge (https://sourceforge.net)
Re: How to install PowerPC GCC compiler under CYGWIN environ
The geneirc proceedure for any processor is listed step by step at
http://gcc.gnu.org/install/
also at
http://www.faqs.org/docs/ldev/0130091154_71.htm
It is possible to interface CAN with other buses but that is not simple. I don't think that you can use the CAN feature of PIC as it to interface with profibus etc.
you should first take squre on both sides of the equation.
That would result in an equation containting only one term in square root.
Simplify that equation and collect the term containing square root on one side and the rest on the other side.
Again take squre on both sides.
Simplify the...
RTOS needs some mechanism to ensure/provide timing facility to the application tasks. This is usually provided by a timer interrupt from the hardware. But the timer frequency cannot be the same on all hardware platforms. So, if we write an application for one target platform (say some PowerPC at...
verilog to layout using microwind
You may get it from Xilinix Website. ISE has different versions among which ISE webpack is avilable for free donwload but you would have to register first for that. The link to ISE is
https://www.xilinx.com/products/design_resources/design_tool/index.htm
and to...
Re: semiconductor
Basic:
A semi conductor is material that contains two types of charge carriers; electrons and holes.
Electrons carry -ve charge while holes carry an equivalent amount of +ve charge.
Elements of groupIV (Si, Ge) in Periodic Table form these types of materials.
A pure Si/Ge is...
Re: Optocoupler
It means there is no flow of electrical signal between the two rather the electrical signal is converted into light signal which travels between the two.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
