Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Sir you need to specify your intended application and which ARM architecture you plan to use.
I use both Atmel (M3/M4F/Dual Core M4F) and Infineon (M4F) ARM MCU. Both are equally good. Personally I found Atmel has an edge with respect to communication peripherals (both quantity and simplicity to...
I need to design a low cost power analyzer for my thesis work (solar inverter system) as one is not available and their is no plan to buy a new one.
Power Analyzer will only be used as an instrument for measuring electrical signal of characteristics 230VAC; 0.5-10 Amps. current; Single Phase and...
Probably. Kindly conform that you have completely isolated positive terminal of power supply from the circuit and only and and only one path exist from the positive terminal of your power supply to your circuit that must be your ammeter.
Also make sure you have selected a proper display range in...
Sir, I thank you for our suggestion.
I had looked at this particular IC but was passed over as our vendor (Digikey) does not provide it. We have selected TLE6250GV33 provided by Infineon AG. The power was provided by dual output LDO as specified in application circuit for the IC.
My only...
System V is used from Old version of Unix system operating system API. POSIX (Portable Operating System Interface Unix) is meant to be new portable implementation of API created after during Unix War. POSIX is supposed to be thread safe and is relatively advanced but still System V is used...
We are building an automation system where by sensor will be separated form indicators/totalizator by few meters. We have decided to use CAN bus for communication between sensor and indicators.
We are suppling 24V to the sensor module. I would like to know if it is possible to supply power over...
We wish to develop commercial application.
We am using Atmel SAM3N and SAM3S MCU with Atmel Studio 6.
We plan to use RTOS in this project. We have shortlisted 2 candidates FreeRTOS and CooCox CoOS.
My question is about their licensing.
If I use them for commercial purpose what will I have to do...
The major difference is how they do it (fetch instruction, decode, execute and store). In general in layman's terms x86 can directly perform operation on main memory while PPC and ARM require operand to be loaded in their local register before any operation can be performed on them.
Length of...
Sir I would suggest BeagleBoard-X-15. Its specs look very promising especially AM5728 processor. The board will come with 2 GB RAM, 4 GB flash, USB 3.0, 1 Gb Ethernet and the list continues but the real goody is AM5728 processor which contains Dual Core A-15 at 1.5GHz, Dual core ARM M-4 at...
Sir please re-phrase your question.
Inter-Process Communication(IPC) in Linux Kernel can take place as :
Pipes of all types/kind
Shared Memory (using semaphores)
Message Queue
Sockets
File Based
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
