Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi There !!
I'm trying to use the CoolRunner-II CPLD XC2C256 propagation delay to create adjustable delays of several ns duration. I can not use FPGA because the cost is too high compared with a CPLD
Such delays are typically used in physical experiments to detect the arrival of 2 events...
Re: FFT implementation
Thanks Echo47 !!!
I have try your "mag=sqrt(real*real+imag*imag)" and it works
making ABS(real) it works too but i'm not sure if this is ok
I'm trying with a C function and it works ok with and without imaginary part!!
Making Imaginary part=0 y have a duplicate...
Re: FFT implementation
Thanks viswa!!! if you can post your matlab code i'll try it....
I have some FFT examples in matlab but i cant see how to work this:
----------------------------------------------------------------------------------
t=1:200;
sin1=sin(2*pi*30/1000*t)...
Hi all !!
I'm tring to make a litte FFt application
I'm tring with visual C++ first and later i'll try with my C microcontroller compiler
I have some questions...
First of all, it seems to be necessary to have a complex array with real and imaginary values
I have an array with a full...
microchip flash botloader
Hi, I'm trying to program a pic 18F8720 with a microchip bootloader
i have found this aplication note from microchip website:
Flash bootloader for PIC18f and 16f devices (an851) and some source files to make this bootloader Author: Ross M. Fosler and Rodger Richey...
200W 85 to 250V Power supply design
Thanks HARDCORE for your suggestion this is a good idea !!!
Are you shure of CRT Monitors with autoswitching and 100 to 230 Watt ??
I always thought that this kind of monitors never consume more than 50 or 60W
You know where can i find some scheme ...
Hi, i need to know the best configuration to do a 200W with 85 to 250V input and 24V output power supply
I have try a push pull but with a TL494 control (cheap IC), need very high voltage Power mosfets but is a "simple" design (2 exciter signals are ground refered and no need isolated...
More PLLs
Try this:
SA7025 philips (The best)
MB1506 fujitsu (Good but only 500Megs)
MB1507 fujitsu (More frecuency than 1506)
SDA3302 Siemens (Good but big steps)
TSA5511 = SDA3302
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.